How to automatically adjust the arm to adjust the brakes? You can control the braking effect by adjusting the neutral gear. When designing automatic adjustment arms, preset different brake clearance values based on the type of axle. The purpose of this design is to better regulate the braking effect of the car owner. Frequent braking can lead to continuous wear of brake shoes and brake drums, and the gap between them will gradually increase. So such issues need to be adjusted in a timely manner. Attachment: Precautions for using automatic adjustment arms: 1. Be careful when installing the automatic adjustment arm. Once these precision parts have problems, they can lead to errors in actual work and affect driving safety. During installation, follow the instructions to install in an orderly manner. 2. Be careful when adjusting the automatic adjustment arm. The automatic adjustment arm determines the braking distance and braking effect, which is closely related to driving safety. 3. Pay attention to maintenance during daily use. No matter where the car is, it needs regular maintenance to avoid some malfunctions.

2. Correct use of automatic start/stop. Automatic transmission car: As long as the car starts, the automatic start stop system is in normal working state. When encountering traffic lights or other reasons to stop, press the brake. Generally, the engine will automatically stop after two seconds. Then, when you have to walk, release the brake, press the accelerator, or gently turn the steering wheel, and the engine will start again. The manual transmission is also equipped with an automatic start stop system. When we stop, we choose neutral, then apply the brake and release the clutch. After the system recognizes these three actions, it will automatically shut down the engine, press the clutch again, and the engine will start automatically. Traffic congestion, please close: Due to the serious traffic congestion problem in China (especially in big cities), turning on/off the engine for a short time will not reduce fuel consumption, but will increase fuel consumption and increase engine load. This skill is fuel-efficient, but it has become the culprit of fuel consumption. So if driving to congested roads, it is recommended that car enthusiasts turn off this feature. Vehicles with this function must have switch buttons in prominent positions for the owner to adjust and use according to specific circumstances. Is it necessary to turn off automatic start stop

Is it necessary to turn off automatic start stop

Firstly, automatic start stop must be turned off in certain scenarios. As for normal driving, whether it is necessary to turn off the engine depends on the car itself.

The benefits of automatic start stop are fuel efficiency and indirect environmental protection. This must have saved too much fuel.

3. There are many drawbacks. It is obvious that the most unbearable thing is that frequent starting and stopping while following or in traffic can be very frustrating. Traffic congestion is already a hassle, and the frustration of stopping and walking is even more troublesome. Compared to the saved fuel consumption, comfort is more important. The most important thing is that the starting speed is clearly different from others, and they are likely to cut in again.

4. Other drawbacks, such as turning, heavy braking, and direct stalling; Battery damage; Automatic start stop in traffic congestion will increase carbon buildup. Although the impact is small, problems with the car will occur over time.

In addition, in the scenario, it is necessary to disable the automatic start stop function:

When wading in water, be sure to turn off the automatic start stop. When the engine is submerged in water, water can easily flow back into the engine from the exhaust pipe, causing the engine to fail to start and being scrapped directly. And because of this risk, the insurance company will reimburse it.

7. When driving on a slope, turn off the automatic start stop function.