The car accelerated jitter will cause the vehicle ahead about the direction of the occurrence of severe wobble, the whole body was similar to "with" feeling. Then how to reduce the loss caused by the jitter when the failure occurs, so what is the cause of the loss?

The car accelerated reason is actually very simple, first check whether the left and right half shaft bending, followed by dismantling the wall around the inner ball joint wear and pits, in most cases the damage caused by the inner cage.

As everyone knows, the modern car engine front and front drive, the ball is retractable to adapt to the terminal and the relative position of the driving wheel drives the vehicle when the gearbox change. After dismantling can be found, namely torque transmission parts, in the cage on the inner wall and the needle bearing skin often contact parts (force), has produced a pit.

The vehicle when anxious acceleration, the engine gearbox assembly to make a slight side flip, thereby changing the point position as the axle axial and axial angle exists within the cage, so this point in the cage during rotation along the axial reciprocating continuous change, this change will continue to force the body on the left and right sides, is the "fear" feeling. Elimination method is self-evident, the replacement of damaged inner ball cage or axle.